Veldtest

Zonnepanelen

Een vergelijking tussen Mono, Poly, PERC en Dubbele PV-modules.

Realtime gegevens
-- -- lokale tijd
Installatie datum: 09-03-2020
--
--
--
--
--
--
--
Uitstraling
Roemenië
44°17'59.9"N
26°11'29.7"E

Mono

2500Wp --
Total solar yield: --

Split-cell

2500Wp --
Total solar yield: --

Poly

2500Wp --
Total solar yield: --

PERC

2500Wp --
Total solar yield: --

* Dit is een veldtest en de resultaten zijn specifiek voor deze installatie op deze locatie,Onderzoek wat de beste oplossing is voor uw eigen situatie, aangezien de resultaten verschillen op basis van omgevingsinvloeden.

Service bestelbus

Altijd klaar voor actie.

If the job doesn't come to the workplace, then bring the workplace to the job, right? A proper service van is always prepared for action. Powered by 230V, the cordless tool batteries are fully charged up and your tablet and printer are ready to check off your office tasks in no time. Cabin lights running on 12V make sure work can continue around the clock.

Providing a perfect service may require great skill, but not necessarily enormous amounts of electrical power. This is why our wide range of effective power solutions are perfect for the smaller and more straightforward setups. Our smaller units are all built with the same professional quality as our larger models: The Professionals Choice.

Vermogen

naar de service

The Victron Energy modular system components allow you to build a complete system, exactly to your needs. While some choices become obvious after calculating the daily energy consumption and required peak power, others may require a bit more thought.

Dagelijks energieverbruik

350 Wh

Peak power requirement

200W

In dit voorbeeld

The daily energy consumption is calculated by adding up the sum of all consumers X how much time they will be used in a day. Add all the Watts of the simultaneously used consumers to calculate the required peak power.

Voor de hand liggende keuzes

Systeem Ontwerp

Overwegingen

Onderstaand enkele van de belangrijke principes van ontwerp uitgelegd, klik op de vragen voor de aanbevelingen van onze technici

  • 01

    Welke (maat) omvormer is een betrouwbare en compacte oplossing?

    Developed for professional duty, the Phoenix range of inverters are a perfect cost-effective solution for systems where shore power charging isn't essential. The Pure Sine Wave technology safely powers sensitive electronics such as computers, the high peak power rating allows high start-up currents from power tools, so you can power any load, problem free. The wide range of Phoenix inverters consists of many smaller models, making it easy to efficiently match the right inverter to the lower (peak) power requirements of your system.
    Inverters convert 12V DC power into 230V AC power. Inverters should be sized to handle the average AC load continuously and should match the expected peak power current of the simultaneous AC loads. Bekijk alle omvormers

    De keuze van professionals

    Phoenix Inverter VE.Direct 375/12: De verwachte 200 W piek belasting zijn geen probleem voor de 700W piek belasting van dit model er is nog ruimte voor toekomstige uitbreidingen. De meeste bestelwagens hebben een 12 V systeem het wordt aanbevolen ook de serviceaccu ook 12 V te houden.
    Systems with a higher daily energy consumption, or that rely on less ‘engine time' may not be able to rely completely on charging by the alternator and may therefore require (overnight) shore power charging, especially when using lead-acid service batteries, where a full charge takes more time than using lithium batteries. This is where the Multiplus Inverter/Charger combination is a better choice.
  • 02

    Lithium of loodzuur service accu in welke maat?

    Victron Energy offers multiple options for the service battery, but the main choice is between lead-acid and lithium which mainly depends on the expectations of the performance, cost-per-cycle and physical aspects (size/weight). The choice in battery technology also leads to different consequences for the other system components that are directly attached to (or manage) the batteries.

    In general, use lithium when the daily power demand is extremely intense, when superfast charging is essential or when there are weight or space limitations. Lithium also has a lower cost per cycle. Lead-acid has a lower upfront cost and is perfect for regular, less demanding power profiles and when weight and space are not an issue. The above probably cuts 45 years of battery development know-how a bit short, for more info check our deep dive.

    Victron Energy biedt accu’s van uitzonderlijke kwaliteit met hoogwaardige eigenschappen die grondig getest zijn. Onze informatiebladen geven een goed beeld van de prestaties en de verwachte levenscycli, wat betekent dat u niet voor verrassingen op het gebied van investeringen komt te staan. Onze brede keuze aan accu's
    Keuzes, keuzes... Lithium of loodzuur?

    De keuze van professionals

    12 Volt Deep Cycle AGM 90Ah. A 12 Volt Deep Cycle AGM 90 Ah battery can deliver 576Wh per day to power the loads problem free. Compared to Lithium, charging the batteries will be slower. The 18 Amp DC-DC charger is connected to the smart alternator and will charge a 50% discharged service battery in 5-7 hours. When the daily engine time does not allow the battery to fully charge, use a Blue Smart IP22 Charger 12/30 for overnight shore power charging.

    Lithium 12,8V Smart 60Ah. This extremely compact and light box is packed with a staggering 768 Wh of energy, more than enough to supply all the expected loads of 350 Wh, even when keeping 20% in reserve for life cycle reasons. Due to its limited shape and weight, all the space can be dedicated to the workspace. Thanks to the Lithium's fast charging characteristics, the battery can be fully charged by the engines alternator in just 1 hour (the engines 90 Amps alternator will safely charge with 45 Amps per hour, calculating with ±50% of the rated capacity).
    As a rule of thumb for sizing the batteries, we calculate with 2x the daily energy consumption for lead-acid batteries because of their 50% safe discharge capacity and keep roughly 20% in reserve for Lithium batteries. Select the nearest model from our range and round up the amps to be sure.
  • 03

    Veilig combineren van (lithium) service accu's met (smart) dynamo's en start accu's.

    Master all challenges that come with combining (smart) alternators, starter- and service batteries (lithium or lead-acid) with our wide range of DC-DC chargers, battery combiners or Smart BMS products. Our solutions are specially designed for vehicles and make sure both lead-acid and lithium service batteries can be properly charged, without damaging the smart alternator or the batteries.
    The right solution primarily depends on the combination of your alternator (smart or conventional) and service battery type (lead-acid or lithium), amongst other factors. Feel free to ask a local Victron Energy installer for advice. Vraag de installateur in de buurt

    De keuze van professionals

    Lead-acid: Orion-Tr 12/12-18: This professional ‘Battery-to-Battery' DC-DC charger is designed to safely connect any size alternator (smart or conventional) and starter battery to any type of service battery. The 12V to 12V charger charges the service battery with 18 Amps per hour when the engine is running.
    Lithium: Smart BMS CL 12/100: For Lithium based 12V power systems with a load up to 100A, this compact and robust solution is the perfect choice. The device consists of a Battery Management system, Current Limiter and Battery Combiner in one. This manages and charges the Lithium battery properly and fast. It limits the charge current to the safe zone of the alternator output specifications, to prevent the alternator from overheating or early wear. The service- and starter battery are safely combined too. The device works with VictronConnect App.
    In beide gevallen beschermt een aparte BatteryProtect 100 A de service accu tegen te diepe ontlading door DC belastingen, die gedimensioneerd moet zijn voor de maximaal te verwachten stroom.

Professionele uitdagingen?
Vraag de Victron Professional in de buurt.

The number of options for each component are quite extensive. This is why we train Victron Energy Professionals to perfectly translate your exact needs into robust solutions. They feel a great responsibility to always advise the right solution (even when this may sometimes go against what clients have in mind initially). Everything to keep you satisfied and your investments secure for years to come.
Always feel free to ask your local Victron Energy Professional
Een Victron Professional naast een auto met Victron apparatuur

Uw browser lijkt de nieuwste technologieën niet te ondersteunen. Overweeg het gebruik van een modernere browser om deze sectie correct te zien.

Schema

voor een op lithium en loodzuuraccu gebaseerd systeem

Hoe worden de systeemontwerp overwegingen in een robuust systeem vertaald?

Serviceaccu
Laden

AC apparatuur (enkel fase)

Elk ‘huishoudelijk’ apparaat of ‘zwaar gereedschap’ dat in een thuis- of werkomgeving te vinden is, kan ook in onafhankelijke energiesystemen gevonden worden. Al deze apparaten hebben wisselstroom nodig om te kunnen functioneren (230 V of 110 V).

Some of these devices such as computers can be sensitive to the quality of the inverted power (bad shore- or generator AC-input power can influence this quality negatively). Motor driven or heat generating equipment may require a high start-up current. All our inverters produce a pure sine wave, even when the AC input quality is less good, ensuring that sensitive loads can be powered and enjoy a peak-power of generally 2x of the inverters rated capacity to power even the heaviest of loads, or basically any load, problem free.

Voorbeelden van AC apparatuur

  • Heavy duty tools such as a drilling machine or a jigsaw
  • Computers
  • Phone chargers
  • Fridge and freezer
  • Lights
  • Coffee machine
  • Microwave
  • or basically any AC powered device you can think of.

Alternators

Vehicles and boats are equipped with engine(s) that generate the power to move, but also generate electrical energy through alternators. Alternators generate electrical energy with a direct current (DC) from mechanical energy, which is used to store the energy in the battery bank or power DC-equipment directly.

Small engines usually have small alternators, larger engines usually have larger alternators, sometimes they are even equipped with (extra) high-output alternators to increase the output. Vehicles, especially with Euro 4/5 engines, may come with smart (variable voltage) alternators, controlling the output based on vehicle operating conditions. This renders it unsuccessful at charging a secondary battery system to a usable level. Lithium service batteries may put a heavy load on the engine’s alternator, which probably needs to be protected from overheating or early wear.

Whatever your engine’s alternator, or service battery type, Victron Energy offers a wide range of solutions to safely connect any alternator to any battery bank, without damaging the smart alternator or batteries. Please check our datasheets for more information. Also, check your manufacturer's documentation to see what output your alternator can provide. With Lithium service banks and conventional or smart alternators we recommend to calculate with 50% the alternator output spec, to not overload the alternator.

Zie al onze DC-DC laders Bekijk alle accuscheiders Zie al onze (Smart) BMS mogelijkheden

Battery Management Systems

Battery management systems take excellent care of Lithium batteries, protecting the individual cells of LiFePO4 batteries against over voltage, under voltage and over temperature and will shut down or reduce charging (VE.Bus products only) or disconnect the loads when this occurs.

Victron Energy offers several BMS options, in general the VE.Bus BMS and smallBMS signal separate devices to disconnect the charging (Cyrix-Li, DC-DC chargers) or disconnect the loads (BatteryProtect), the other (Smart) BMS versions are designed for vehicles or boats and offer more ‘all-in one’ functionalities.

Zie al onze Battery Management Systems

Accumonitor

Een accumonitor is als een brandstofmeter voor de accu. Het registreert hoeveel stroom verbruikt en geladen is. De accumonitor berekent de laadstatus, de overgebleven capaciteit en de tijd totdat de accu leeg is. De accuspanning geeft geen nauwkeurige indicatie over de laadtoestand (zeker niet onder belasting). Een accumonitor doet dat wél.

Victron Energy battery monitors keep track of historical data, like the number of charging cycles, deepest discharge, highest voltage, lowest voltage and so on. It will alert you to critical conditions such as low voltage or low charge and can even shut down the entire power supply to avoid expensive battery damage, or start a generator.

Victron heeft accumonitors met of zonder scherm, met Smart versies kunt u gedetailleerde gegevens volgen en instellingen aanpassen in de gratis VictronConnect app. Bekijk al onze Accumonitors

BatteryProtect

The BatteryProtect disconnects the battery from non-essential loads before it is below a pre-set level (a complete discharge would damage the battery) or before it has insufficient power left to crank an engine.

There is more to a Victron Energy BatteryProtect. Built-in shutdown delays ensure vital electronics aren’t disconnected in error, i.e. when starting an engine causes a short drop in voltage. It will also automatically reconnect everything when the battery is sufficiently recharged.
De BatteryProtect heeft een Remote schakelaar, zodat hij via een BMS of door een schakelaar aan/uit gezet kan worden. De Smart versie is te programmeren met de VictronConnect app.

Zie onze BatteryProtect modellen

Acculaders

Battery chargers recharge batteries (DC) when plugged into shore power (AC).
At the same time the Victron Energy battery chargers can also power devices directly.

All Victron Energy battery chargers are developed for professional duty. Our advanced multi step charging algorithms get the best out of your battery, giving the battery the power it needs, maintaining its health, ensuring better performance... and a longer life.

Smart models work with VictronConnect, so you can check the status and configure all settings of your battery charger remotely via Bluetooth. Chargers with different waterproof ratings (IP rating) are also available. Our wide range of models makes it easy to select the right charger, saving you the cost of having to buy a larger one.

Bekijk al onze laders

DC-DC Acculaders

DC-DC converters, or battery-to-battery chargers (converters with built-in charge algorithms) are used in dual battery systems, where the (smart) alternator and the start battery are combined with the service battery (of equal or different voltages) to charge it. They can also be used to charge applications that have dedicated batteries (eg. bow thrusters), or to power applications that have a voltage different than the service battery bank.

Most DC-DC chargers can be used in 12V or 24V systems and all are suitable for both lead acid and lithium batteries. Some DC-DC charger models can be parallel connected to increase the output current. DC-DC chargers are a perfect and safe solution to charge Lithium battery banks from smart alternators (and lead-acid batteries for that matter).

Lithium accu's laden met de dynamo
Most alternators cannot be directly connected to lithium batteries. A lithium battery will draw more current than the alternator can supply, which may result in permanent alternator damage. To not damage the alternator, current limiting is one of the options to stay within the safe zone of the alternator.

Victron heeft meerdere oplossingen voor dit probleem, één daarvan zijn de DC-DC omvormers:

  • DC-DC converters act as a current limiter between the alternator and the battery: the battery can be safely charged without blowing up the alternator.
  • Victron also offers alternative solutions for dual battery systems powered by alternators. Some (smart) BMS products physically limit the current drawn from the alternator, in other systems, battery combiners might be a solid option. See the datasheets for more info.
Bekijk onze DC-DC omvormers

DC Elektronica

DC-equipment is designed to work directly with the power coming out of the battery bank (Direct Current). Especially vehicles and boats can have (a lot of) DC equipment on board (such as control panels, lights, navigation equipment, auto pilot, depth sounders, etc).

Sommige kleinere off-grid systemen kunnen alleen op DC werken, met 12V lampen, TV's of koelkasten. Grotere systemen combineren AC en DC gebruikers.

In elk geval is het belangrijk de accu te beschermen tegen te diepe ontlading hiervoor heeft Victron de BatteryProtect.

Omvormers

Inverters convert DC power from the batteries to AC power, safely powering any kind of appliance or heavy duty tools with 230V (or 110V in other markets).

All Victron Energy inverters are developed for professional duty and enjoy a reputation of extreme resilience, even in the most demanding conditions. The built-in Pure Sine Wave technology safely powers sensitive electronics such as computers, their high peak power rating allows high start-up currents from heavy duty tools, so you can power any load, problem free. Their high efficiency and ultra low self consumption ensure the stored energy can be used to efficiently power the consumers, instead of having to calculate with wide margins to compensate for energy losses.

Larger models can power industrial appliances and virtually unlimited power can be provided by Parallel or 3-phase operation. Other models come with built-in chargers (Inverter/chargers) which can be used when charging from shore- or generator AC sources is essential. Whatever you need, our wide range makes it easy to select the right inverter for your application, saving you the cost of having to buy a larger one.

Bekijk alle omvormers Bekijk al onze omvormer/acculaders

Service Batteries

The service battery stores power for the system's consumers, providing autonomous power especially for moments when input power sources aren’t (fully) available.

Victron Energy offers several battery technologies, all designed for professional performance, reliability and long service life in the most demanding environments. They come with a 2 year worldwide warranty and our datasheets offer a fair picture of the performance and expected life cycles, meaning no investment surprises along the way.

Terwijl er meerdere technologieën zijn om uit te kiezen, is de belangrijkste keuze tussen loodzuur of lithium wat hoofdzakelijk afhangt van de verwachtingen van prestaties, kosten per cyclus, en de fysieke aspecten (grootte/gewicht).

  • Kies loodzuur als:
  • Wordt af en toe gebruikt
  • Lagere aanschaf kosten
  • Gewicht en ruimte zijn geen probleem
  • Normaal opladen
  • Kies Lithium als:
  • Gebruik dagelijks
  • Lagere kosten per cyclus
  • Gewicht en ruimte overwegingen
  • Snelladen

Service Batteries

The service battery stores power for the system's consumers, providing autonomous power especially for moments when input power sources aren’t (fully) available.

Victron Energy offers several battery technologies, all designed for professional performance, reliability and long service life in the most demanding environments. They come with a 2 year worldwide warranty and our datasheets offer a fair picture of the performance and expected life cycles, meaning no investment surprises along the way.

Terwijl er meerdere technologieën zijn om uit te kiezen, is de belangrijkste keuze tussen loodzuur of lithium wat hoofdzakelijk afhangt van de verwachtingen van prestaties, kosten per cyclus, en de fysieke aspecten (grootte/gewicht).

  • Kies loodzuur als:
  • Wordt af en toe gebruikt
  • Lagere aanschaf kosten
  • Gewicht en ruimte zijn geen probleem
  • Normaal opladen
  • Kies Lithium als:
  • Gebruik dagelijks
  • Lagere kosten per cyclus
  • Gewicht en ruimte overwegingen
  • Snelladen

Zonneladers

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, our solar chargers maximise this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time whilst maintaining the batteries health, ensuring better performance… and a longer life.

De zonneregelaars van Victron gebruiken ultrasnelle maximale power point tracking om elke druppel stroom uit de panelen te trekken.

Smart models allow the solar harvest to be tracked and analysed through the free VictronConnect app, other connectivity options allow a remote connection through our VRM portal. Smaller models have an intelligent load-output, preventing damage caused by running batteries 'flat'. For larger systems, solar chargers can be synchronized, so they act as one large and very efficient charger.

Bekijk onze PV Calculator om bij de zonnepanelen de juiste MPPT-lader te selecteren

Zonnepanelen

Solar panels catch the energy from sunlight and forward it to a solar charge controller which stores that energy in the systems battery bank. Adding solar panels to your system means free energy, independence from the grid and allows you to downsize or eliminate the need for noisy, fuel consuming and maintenance heavy generators.

Victron Energy offers a wide range of highly efficient solar panels that have exceptional low-light performance and high sensitivity to light across the entire solar spectrum, making it the perfect choice for any system. Victron Energy solar panels meet the most stringent safety requirements and their limited warranty means no surprises along the way.

Bekijk al onze zonnepanelen

Startaccu's

Starter batteries are needed to start your engine(s). These batteries are engineered to deal with a large discharge current and enjoy a different technology compared to service batteries. To avoid accidental draining of the starter battery, it should always be isolated from the service batteries. Victron Energy offers multiple solutions for different system types.

Victron Energy offers several Battery Combiners. More comprehensive ways to safely connect the starter- and service battery are also available, including connecting a Battery Combiner to a BMS, all-in-one Smart BMS products or DC-DC chargers. These options may offer more control and configuration options, especially to protect non-regulated alternators from overheating and Lithium batteries from excessive (dis)charging.

Bekijk alle accuscheiders Zie al onze DC-DC laders Zie al onze (Smart) BMS mogelijkheden

VictronConnect

All Victron Energy smart products can be monitored and controlled from the palm of your hand. Just connect the VictronConnect App via Bluetooth and you’ll have direct access to the performance data of your system. You can also easily change settings, turn devices on or off and much more.

Niet-smart apparaten met een VE.Direct poort kunnen smart worden door door het gebruik van een VE.Direct Bluetooth Smart dongle

It is also possible to monitor and control your system remotely. VictronConnect-Remote functionality enables Victron products with a VE.Direct interface to be accessed remotely through a GX product, via the VRM online portal. This powerful feature allows full product configuration and monitoring from practically anywhere in the world using the VictronConnect app. The user interface experience is just like the products were connected locally using Bluetooth or a wired VE.Direct to USB interface.

Zie wat de VictronConnect app kan doen Bekijk onze GX-apparaten
Systeem specificaties
How does the power profile translate into a system? Here is our recommendation for an efficient cost-effective light power solution for mobile service professionals, both for Lithium and Lead-acid battery-based systems.

Overweeg het gebruik van een moderne browser om deze gedetailleerde tabel en de volledige sectie correct te zien.

Energy consumption
Verwachte verbruikers
Opladen van ±3 accu's voor draadloos gereedschap.
Stroomvoorziening voor een klein mobiel kantoor (laptop/printer/smartphone)
Cabine verlichting (LED)
Dagelijks energieverbruik:
350 Wh
Benodigd piekvermogen:
200 W
Systeem piekvermogen:
700 W
Max. energieverbruik Lood-zuur:
540 W
Max. energieverbruik Lithium:
768W
Omvormen
Inverter
Victron Phoenix 12/350
Opslag
Service battery:
110 Ah 12 V AGM of
Lithium: 12,8 V / 60 Ah
Accu bescherming:
BatteryProtect 100A
Protects the battery from excessive discharge. Use for both lead-acid and lithium systems
Generatie
Laden met de dynamo van de motor (zie uitleg)
Dynamo uitgang:
70-90 A*
Veilige opbrengst 50%
* Voor specificaties zie gegevensblad van de fabrikant.
Loodzuur laden:
Orion-Tr 12/12-18* of
Cyrix-ct 120A**
* Of smart versie
** De Cyrix werkt niet met "slimme" dynamo's.
Voor Lithium gebruik:
Smart BMS CL 12/100
Afgezekerd met maximaal 40 A, de LiFePO4 accu met 30 A laden, een 50% ontladen accu in ±1 uur volledig opladen.
Met de + verbonden, niet noodzakelijk om DC belastingen af te koppelen.
Bewaking
Accumonitor:
SmartShunt 500A Accumonitor
Uitbreidingen
Battery charger:
Blue Smart IP22 Charger 12/30
In case of <2 hours of daily charging via the engines alternator, add shore power charging or solar charging.
Zonnepaneel:
BlueSolar Paneel: : ± 100 W
Zonnelader:
Smart MPPT 75/15
Volledige lijst weergeven Pijl naar beneden
Volledige lijst weergeven Pijl naar beneden

Waarom Victron Energy?

De juiste producten voor het werk

As you are always on the road, you’ll want reliable but cost-effective solutions that power you through the years ahead. It’s important that you can select power supplies that match your exact needs and live up to their spec so they won’t let you down. Victron Energy has a wide range of modular connected products that stay true to their promise. They are Powered by know-how, thanks to 45 years of mastering power challenges with innovation.

Icoon van 45 jaar Victron Energy
Lithium accu

Waarom Victron Energy?

Altijd aan. Altijd beschikbaar.

Our robust systems have been proven to deliver unequalled reliability time and time again. This is marked by our worldwide market leadership in power supply equipment for Ambulances, this is illustrated by countless stories of 40+ year old Victron Energy inverters still doing what they were built to do.

Ambulance

Waarom Victron Energy?

Betrouwbaarheid zorgt voor een lange levensduur

When making power supply investment decisions, calculations purely based on price can be deceptive. Their true performance and expected service life cycle are equally important. Good thing Victron Energy equipment lives up to their specifications, both in terms of performance and expected life cycle (when used as designed). Our 5 year warranty and fair and fast repair policies mean your investments are protected and under most circumstances, won’t let you down.

jaar garantie
Een Victron professional laat de VictronConnect app zien

Waarom Victron Energy?

Professionele uitdagingen. Geaccepteerd.

Whatever powers your vehicles’ electronics, or toolset you are bringing for the job, Victron Energy has one the widest ranges of power supply equipment in the market to power your works of genius. The advantage of working with just one brand that covers it all means having just one contact for upgrades or resolving any rare issues that may occur. Our global network of Victron Energy Professionals are trained with 45 years of problem solving experience. They can translate your challenges into robust solutions that will keep you satisfied and your investments secure for years to come.

Een Victron professional naast een auto met Victron apparatuur in de achterbak

Waarom Victron Energy?

Professionele Voertuigen
gedreven door kennis

Kijk hoe wij typische voertuig problemen oplossen.
Motor aangedreven door
Pijl symbool
Verken onze expertise in Professionele voertuigen

Uw browser lijkt de nieuwste technologieën, om deze sectie correct te zien, niet te ondersteunen; overweeg het gebruik van een moderne browser.

Smart BMS CL 12/100

Veilig combineren van elke dynamo met Smart Lithium accu's.

Bekijk een gevarieerd aanbod van voertuig systeem schema's
Download ons boekje
Download icon
Gedetaillerde vergelijking

An expert's view: lithium or AGM batteries

Meer weergeven Carret icon
DC-DC Acculader

Professioneel service accu opladen met de Orion-Tr Smart.

Victron Professional

Inschrijven voor het volgende voertuigen webinar of training

Download onze folder

Bekijk al onze Professionele Voertuigen producten en meer voorbeelden.

VictronConnect

Real-time inzicht en volledige controle met onze VictronConnect app

Voorbeeld oplossingen van onze partners

Bezoek ons nieuwsblog

Zoek een lokale dealer

Ons gevestigde wereldwijde netwerk van lokale Victron Professionals is toegewijd u te helpen bij het vinden van een optimale oplossing voor uw uitdaging.

Vertrouw op onze wereldwijde service

Bij Victron vinden we het belangrijk dat klanten snel en vakkundig worden geholpen. Dit is de reden waarom ons wereldwijde netwerk van Victron Professionals de hoogste technische knowhow heeft en zich inzet om zo snel mogelijk reparaties uit te kunnen voeren,

zodat u uw reis kunt beginnen of voortzetten, waar u ook heen gaat.